Every planting cycle starts with a plug, and every farm reaches the same fork in the road: raise them or buy them. The nursery make-or-buy decision looks like a cost comparison and is not — it is a choice about risk, space, labour and scheduling control, and farms that decide it by unit price alone usually end up paying for the choice twice.
The general trade-off between buying plugs and running a nursery has been covered from the grower’s side, and the propagation stages themselves have their own guide. This article stays on the decision: how to cost each option honestly, and where each one wins.
What the Make-or-Buy Decision Really Weighs
Strip the question to its components and five factors decide it:
- True cost per plug, both sides: not the invoice price. In-house plugs carry seed, media, trays, energy, labour and losses; bought plugs carry the delivered price, minimum order quantities and freight. The worked numbers below show how far invoice and true cost diverge.
- Germination and establishment risk: a bought plug arrives having already survived germination; an in-house plug’s failures are your losses. On a difficult species, the nursery carries risk you would otherwise hold.
- Labour and space: propagation occupies bench space, skilled attention and climate-controlled area year-round — resources a leafy farm might otherwise devote to production.
- Scheduling control: in-house sowing moves on your calendar; plug orders move on the supplier’s. Farms with tight succession schedules feel this difference every cycle.
- Quarantine and biosecurity: every incoming plug delivery is a disease and pest entry point that needs inspection space and discipline.
The right answer usually mixes the options by crop rather than choosing once for the whole farm — the hybrid arrangement below is where most commercial programs settle.
Costing In-House Propagation Honestly
The usual error on the in-house side is counting seed and media and calling it the cost. A worked example, with assumed figures for illustration only — a mid-size leafy farm sowing 500 plug trays per month:
- Materials: seed, media and tray amortisation, say a planning range of 2–4 currency units per tray depending on crop and cell count.
- Energy: germination chamber and propagation room climate, sized on chamber run hours — often 1–2 units per tray across the year, more in winter; the hardware is covered in the germination chamber and propagation room guide.
- Labour: sowing, watering, moving, monitoring. At even 10 minutes per tray across the propagation phase and a loaded labour rate, this becomes the largest line — frequently 3–6 units per tray.
- Losses: germination shortfalls, uneven lots, culls. A planning assumption of 5–15% loss on a good program, higher on difficult species, multiplies every other line.
- Occupied space: propagation benches and chambers could grow salable crop. Charging them a notional rent is optional but makes the comparison honest against bought plugs.
Against that, bought plugs arrive at a delivered price that includes someone else’s germination risk, energy and labour — usually with a margin on top, but also with none of the overhead. The comparison that matters is delivered plug price against your fully loaded in-house cost, both including losses, on the same crop.

What Buying Plugs Actually Costs
The bought-plug side has its own hidden lines. The quoted unit price rarely includes the full reality:
- Minimum order quantities: suppliers sell by tray or case, and a small farm’s weekly need rarely matches. Over-ordering for a mixed crop plan means holding plugs past their transplant window, where quality decays fast.
- Lead time and variety choice: plug orders are placed weeks ahead, and the supplier’s catalogue — not your variety program — sets the genetics. Farms competing on specialty varieties lose that edge.
- Freight and arrival condition: plugs shipped any distance arrive stressed, and a bad transit week shows up as uneven establishment in the house, attributed everywhere except the delivery.
- Quarantine cost: incoming plugs need an inspection and holding area, a few days’ observation, and a written acceptance routine — otherwise one contaminated delivery reaches the whole farm.
None of this makes buying wrong; it makes the decision require arithmetic. Where a supplier sits close, delivers reliably and carries the varieties you want, the effective delivered cost is often genuinely below what a small nursery can achieve — particularly for crops where germination is unreliable.
| Factor | Sowing in-house | Buying plugs |
|---|---|---|
| Cost per plug | Fully loaded: materials + energy + labour + losses; labour usually dominates | Delivered price + freight + quarantine handling; margin included |
| Germination risk | Held by the farm, 5–15% planning loss on good programs | Held by the supplier; farm holds only transit risk |
| Scheduling control | Full — sow to your own calendar | Bounded by supplier lead times and minimum orders |
| Variety choice | Any commercially available seed | Supplier catalogue; specialty varieties may be unavailable |
| Space and skill | Needs chambers, benches, trained staff year-round | Needs inspection space and a receiving routine only |
| Biosecurity | Closed system, low external exposure | Every delivery is an entry point to inspect |
Quality Control on Incoming Plugs
Where plugs are bought, the receiving routine is the whole defence. Incoming batches should be inspected on arrival against the agreed spec — cell fill, root development, height uniformity, visible pests — and the acceptance standard agreed with the supplier in writing before the first order, following the same discipline as any incoming goods inspection. Transplant the batch promptly: plugs held past their window establish unevenly, and the delay reads later as a crop problem, not a delivery problem. The timing rules for moving plugs into the house are set out in the propagation and transplanting guide, and the hardening-off steps that follow transplanting matter just as much for bought plugs as for home-raised ones.

Hybrid Arrangements That Work
Most commercial farms end up splitting the nursery, not choosing one side:
- Sow the fast crops in-house: lettuce, Asian greens and other reliable, high-volume leaf crops have dependable germination and constant demand — the profile where in-house plugs are cheapest and scheduling control pays most.
- Buy the difficult or slow species: crops with fickle germination, long propagation phases or specialist genetics — grafted seedlings being the classic case — are bought from nurseries that do them at scale.
- Buy the surge: even farms with a capable nursery buy plugs to cover peaks, so the propagation area is sized for the baseline rather than the maximum.
A workable planning rule from procurement practice: run in-house only where monthly plug volume keeps the propagation space and crew fully employed, and buy everything below that threshold. Below it, the nursery’s fixed costs spread over too few plugs and the delivered price wins.
The nursery make-or-buy decision rewards farms that cost both sides fully and split by crop: in-house where volume and reliability justify the overhead, bought plugs where risk, lead times and specialty genetics say otherwise. Decide per crop, with numbers, before the propagation capital is spent.
FAQs About the Nursery Make-or-Buy Decision
Is buying plugs always more expensive than sowing in-house?
No. Once in-house costs are fully loaded — labour, energy, losses and occupied space — small and mid-size volumes often cost more than delivered plugs. In-house wins where volume is high, germination is reliable and the propagation area stays fully employed.
What loss rate should we assume for in-house germination?
A planning range of 5–15% covers reliable leafy species on a well-run program; difficult species and old seed run higher. The honest costing multiplies every other cost line by the loss factor, because failed cells consume materials, energy and labour too.
How should incoming plugs be inspected on delivery?
Against a written spec agreed with the supplier before the first order: cell fill, root development, height uniformity and visible pests, plus a few days in a separate holding area before release. The incoming inspection routine for seeds and media transfers directly to plugs.
Which crops should almost always be bought as plugs?
Species with unreliable germination, long propagation phases or specialist genetics — grafted seedlings are the standard example. The nursery that does them at scale carries skill and risk a production farm cannot economically duplicate.
Does buying plugs hurt our planting schedule?
It can. Plug orders run on supplier lead times and minimum order quantities, so succession schedules with tight week-to-week spacing need orders placed well ahead. Where the calendar is the binding constraint, in-house sowing of the fast crops usually pays for itself in schedule control.
Related Reading
- Buy Plugs or Run Your Own Nursery: The Trade-Off — The grower-side view of the same fork in the road
- Propagation Media: Rockwool, Foam and Sponge — The media side of the in-house costing
- Seed Trays and Plug Trays: Cell Counts and Specs — The tray economics behind cost per plug
- Grafted Seedlings for Hydroponics: When It Pays — The classic bought-plug crop
- Incoming Inspection of Seeds and Growing Media — The acceptance routine plugs need on arrival
Next Step: What to Send for a Quotation
Whether the answer is a nursery build-out or a plug supply contract, the equipment quote should follow the decision, not lead it. Sizing the propagation area to the crop plan is what keeps the unit economics honest.
Deciding on a propagation area, germination chambers or a plug supply arrangement? For an RFQ or project consultation, send: target crops and monthly transplant volumes; current plug source and its delivered cost; available propagation space and climate capacity; labour availability and rates; succession schedule and lead-time tolerance; delivery schedule; and the budget band. G AND N FORTUNE LIMITED supplies propagation systems, germination chambers and seeding equipment quoted against those parameters.
Planning a Hydroponic Project?
Need help choosing a growing system or equipment? Tell us about your project requirements.



