COMMERCIAL HYDROPONIC GROWING SYSTEM

DWC Floating Raft 120x60cm XPS Board with 50mm Holes for Commercial Raft Beds

DWC floating raft at 120x60cm or 100x60x3cm in high density XPS, white, with 50 holes at 5cm pitch for 2 inch net pots, packed 102x63x63cm.

Dutch Bucket / Bato Bucket

Tomato, Pepper & Cucumber

Project Configuration

DWC floating raft holding a full sheet of lettuce in a deep water bed
PRODUCT TYPE

Dutch Bucket

APPLICATION

Commercial greenhouse hydroponics

SYSTEM OPTIONS

Ground-supported and hanging layouts

PROJECT USE

Farm, distributor and greenhouse project supply

01 / PRODUCT OVERVIEW

Product Overview

DWC floating raft close detail of the structure
01

Fifty Holes Per Board

A 120 by 60 cm board is drilled with fifty sites at 5 cm, the spacing that suits two inch pots in a raft bed.
02

Closed Cell XPS

Extruded foam has closed cells, so a board does not take on water and sink after a few cycles in the tank.
03

High Density Body

Density is set high enough that a board can be walked past without cracking at the hole edge.
04

Carton Of Ten

Boards stack into a 102 by 63 by 63 cm carton, ten to a box ready for a container.
02 / TECHNICAL CONFIGURATION

Specifications & Key Features

DWC Floating Raft 120x60cm XPS Board. Fifty holes at five centimetre pitch is a planting density, not just a hole count: it sets how many heads a bed carries per square metre before the leaves touch and the canopy closes.

Key Features of the DWC floating raft

  1. Board at 120x60cm, or 100x60x3cm on request.
  2. High density XPS, white, closed cell so it floats.
  3. Fifty holes at 5cm pitch for 2 inch pots.
  4. Hole size and layout cut to your specification.
  5. Packed 102x63x63cm for shipping.
  6. Suits DWC, aeroponic and aquaponic beds.

Dwc floating raft Specification

Product NameDWC floating board
Size120 x 60 cm / 100 x 60 x 3 cm
MaterialXPS foam
ColourWhite
Holes50 holes at 5 cm, 2 inch pots
Packing102 x 63 x 63 cm
AdvantageHigh density, closed cell
ApplicationDWC, aeroponic, aquaponic

Where the DWC floating raft is used

Commercial raft beds, deep water culture houses and aquaponic beds where plants float on the solution surface.

Installation and System Integration

Float the board with the pots already set, leaving a gap at the bed edge so the board can be lifted for inspection, then check that the roots reach the water.

Why Choose GNFORTUNE

Pitch is the variable to think about: five centimetres is tight for mature lettuce. As a result, many growers plant alternate holes and skip the rest. You can read more about the background of this method on Deep water culture.

Related Hydroponic Systems

You may also need:

Frequently Asked Questions

Can holes be cut to a different size?

Yes, hole size and spacing are made to your specification.

Will the board sink over time?

Closed cell XPS does not take on water. As a result, it stays buoyant.

How many heads per board?

Up to fifty if every hole is used, fewer with wider spacing for mature heads.

03 / PRODUCT DETAILS

Components & Design Details

DWC floating raft installation and layout in use

Board On Water

A raft floating in a full DWC tank.

Hole And Pot

A two inch pot seated in a board hole.

Board Edge

The cut edge showing the closed cell foam.

Full Raft Crop

Lettuce filling a board at harvest.
04 / COMMERCIAL APPLICATIONS

Applications for Commercial Greenhouses

DWC floating raft packing and delivery condition

Float Tank Beds

Deep water tanks where plants float on the surface.

Aquaponic Float Beds

Beds sharing water with a fish tank.

Aeroponic Staging

Boards used to hold plugs above a mist chamber.
05 / SYSTEM OPTIONS

Installation Options

OPTION 01

Boards Only

Plain foam for a grower cutting their own holes.
OPTION 02

Drilled Boards

Fifty hole pattern cut before dispatch.
OPTION 03

Hole Spacing To Pot

Spacing set to a pot size already in use.
DWC floating raft application scene in the growing site
DWC floating raft greenhouse growing scene
06 / PACKING & DELIVERY

Packing & Delivery

✓ Protected Bundling
Show how channels are stacked and protected before shipment.

✓ Container Loading
Add verified loading quantity and packing data when confirmed.

✓ Project Shipment
Explain project-based packing only when the supplier confirms the service.

07 / TRUST & CERTIFICATION

Product Certifications & Quality Assurance

Review available documentation and certification records to support your technical evaluation and purchasing decisions.

Product Documentation

Review relevant documents for your product and project requirements.

Quality Assurance

Request supporting information for your procurement review.

Document Verification

Contact our team to confirm document scope and applicability.

08 / BUYER FAQ

Frequently Asked Questions

What crops are shown with this NFT gully?

The supplied product page shows strawberry and leafy-green greenhouse applications. Final planting spacing and layout should be confirmed for the specific crop and project.

Can the support system use different installation methods?

The supplied page shows both galvanized support stands and hanging greenhouse layouts. The final support configuration should be matched to the greenhouse structure.

Is this page intended for commercial greenhouse buyers?

The source material includes multi-row greenhouse installations and project photographs, so the redesigned page is structured around commercial and project-based buying decisions.

What information should be prepared for an RFQ?

For a useful project discussion, prepare the crop type, greenhouse dimensions, preferred row layout and any confirmed channel or support requirements.

09 / PROJECT RFQ

Planning an NFT greenhouse project?

Share the crop type, greenhouse size, row layout and target production plan so the sales team can discuss the appropriate gully and support configuration.

Request a Project Quote

Tell us about your requirements. Our team will review your inquiry and contact you about the next steps.