Single span nft trough in plastic at 100x50mm, food grade PVC with patent base, sized for one bay houses and tunnel rows.
Dutch Bucket / Bato Bucket
Tomato, Pepper & Cucumber
Project Configuration

Dutch Bucket
Commercial greenhouse hydroponics
Ground-supported and hanging layouts
Farm, distributor and greenhouse project supply

Single Span NFT Trough Plastic 100×50 Channel. A single span nft trough has one job, one bay, one slope, one feed line. Also, the 100×50 plastic section does it without the joins a multi span layout would need.
| Size | 100x50mm |
| Material | Food grade PVC |
| Thickness | 1.8mm or 2.0mm |
| Length | 3m, 5m, 5.8m or customized |
| Holes | Diameter 40mm, 50mm, 60mm |
| Design | Patented depressed base |
| Application | Single span greenhouse |
One bay tunnels, smallholder vegetable houses. Also, pilots proving NFT before scaling to multi span. Tunnel houses run the trough the full bay length with one feed line at the head. The single slope is set at install. This is because one bay means one slope decision done right once.
Run the trough the full bay length, set the single slope at install rather than shimming later. Also, hang one feed line at the head. Pilot growers prove NFT on this trough before committing the farm to multi span.
One span means one slope decision. Getting it right once, at two percent fall, keeps the film even for the whole house. You can read more about the background of this method on Nutrient film technique.
You may also need:
It suits any single bay house or covered row.
2.0mm for exposed tunnel ends, 1.8mm inside.
Yes, matched connectors extend the trough.









✓ Protected Bundling
Show how channels are stacked and protected before shipment.
✓ Container Loading
Add verified loading quantity and packing data when confirmed.
✓ Project Shipment
Explain project-based packing only when the supplier confirms the service.
Review available documentation and certification records to support your technical evaluation and purchasing decisions.
Review relevant documents for your product and project requirements.
Request supporting information for your procurement review.
Contact our team to confirm document scope and applicability.
The supplied product page shows strawberry and leafy-green greenhouse applications. Final planting spacing and layout should be confirmed for the specific crop and project.
The supplied page shows both galvanized support stands and hanging greenhouse layouts. The final support configuration should be matched to the greenhouse structure.
The source material includes multi-row greenhouse installations and project photographs, so the redesigned page is structured around commercial and project-based buying decisions.
For a useful project discussion, prepare the crop type, greenhouse dimensions, preferred row layout and any confirmed channel or support requirements.
Share the crop type, greenhouse size, row layout and target production plan so the sales team can discuss the appropriate gully and support configuration.
Tell us about your requirements. Our team will review your inquiry and contact you about the next steps.