PE feed tube and fittings for carrying nutrient solution from the tank to each channel, with barbed tees, elbows, grommets and shut off valves.
Greenhouse NFT
Strawberry & Leafy Greens
Project Configuration
PVC NFT hydroponic gully / channel
Commercial greenhouse hydroponics
Ground-supported and hanging layouts
Farm, distributor and greenhouse project supply
PE Feed Tube Fittings for Hydroponic Greenhouses. A feed line is only as good as its joints. These PE feed tube fittings let one main line split into as many drops as the house has rows. Also, every joint pushes together by hand without glue or a heat gun.
| Product Name | PE feed tube fittings |
| Material | Polyethylene |
| Parts | Barbed tee, elbow, end plug, grommet, valve |
| Use | Nutrient distribution from tank to channel |
| Fitting Method | Push fit, no glue |
| Origin | Guangdong, China |
Greenhouse NFT houses, vertical racks and substrate gutters where one pump has to serve a row count that changes between crops.
Run the main line along the high end of the frame, punch the drops at the row spacing, then push a grommet and a barb into each channel wall. A valve at the head of every drop lets you shut one row without touching the pump.
Push fit parts keep the wet end serviceable by the grower rather than a plumber, which matters on a site where a blocked dripper has to be cleared the same morning. You can read more about the background of this method on Irrigation.
You may also need:
They are matched to the tube size supplied with the set. As a result, order them together.
Yes, a shut off valve at the head of each drop isolates one row.
No, every joint is a push fit with a barb and a grommet.
✓ Protected Bundling
Show how channels are stacked and protected before shipment.
✓ Container Loading
Add verified loading quantity and packing data when confirmed.
✓ Project Shipment
Explain project-based packing only when the supplier confirms the service.
Review available documentation and certification records to support your technical evaluation and purchasing decisions.
Review relevant documents for your product and project requirements.
Request supporting information for your procurement review.
Contact our team to confirm document scope and applicability.
The supplied product page shows strawberry and leafy-green greenhouse applications. Final planting spacing and layout should be confirmed for the specific crop and project.
The supplied page shows both galvanized support stands and hanging greenhouse layouts. The final support configuration should be matched to the greenhouse structure.
The source material includes multi-row greenhouse installations and project photographs, so the redesigned page is structured around commercial and project-based buying decisions.
For a useful project discussion, prepare the crop type, greenhouse dimensions, preferred row layout and any confirmed channel or support requirements.
Share the crop type, greenhouse size, row layout and target production plan so the sales team can discuss the appropriate gully and support configuration.
Tell us about your requirements. Our team will review your inquiry and contact you about the next steps.
