COMMERCIAL HYDROPONIC GROWING SYSTEM

Rolling Bench Flood Table in Food Grade ABS with Hot Dip Galvanised Frame 2 to 6ft Wide

Rolling bench flood table from 2ft to 6ft wide at any length, food grade ABS tray on a hot dip galvanised frame, 30-60cm side travel, 70-90kg per square metre.

Greenhouse NFT

Strawberry & Leafy Greens

Project Configuration

rolling bench flood table with young plants and an aisle opened up
PRODUCT TYPE

PVC NFT hydroponic gully / channel

APPLICATION

Commercial greenhouse hydroponics

SYSTEM OPTIONS

Ground-supported and hanging layouts

PROJECT USE

Farm, distributor and greenhouse project supply

01 / PRODUCT OVERVIEW

Understand the product and buying logic in one section.

rolling bench flood table close detail of the structure
01

Six Bench Widths

Widths run from 2 ft to 6 ft, and length is built anywhere between 2.44 and 20 metres, so a bay is filled edge to edge.
02

Thirty To Sixty Travel

Each bench rolls 30 to 60 cm to either side, which turns a single aisle into access to two full beds.
03

Load Per Square Metre

The frame is rated for 70 to 90 kg per square metre once trays are wet, so a flooded bench is still inside its limit.
04

Hot Dip Galvanised

Legs and rails are hot dip galvanised after fabrication, which is where a wet floor normally finds weak steel.
02 / TECHNICAL CONFIGURATION

Keep specifications readable instead of burying them inside a long page.

Rolling Bench Flood Table ABS Galvanised. A rolling bench earns its cost in aisle space: the table slides 30 to 60 centimetres each way. As a result, one walkway serves two benches. The tray is food grade ABS on a hot dip galvanised frame rated at 70 to 90 kilograms per square metre.

Key Features of the rolling bench flood table

  1. Widths from 2ft to 6ft, length made to the house.
  2. Food grade ABS tray, white, easy to wash down.
  3. Hot dip galvanised frame resists a wet room.
  4. Travel of 30 to 60 centimetres to either side.
  5. Rated 70 to 90 kilograms per square metre.
  6. Lengths from 2.44 m up to 20 m.

Rolling bench flood table Specification

Product Name Rolling bench flood table
Width 2 / 3 / 4 / 5 / 6 ft
Length 2.44 m to 20 m
Tray Material Food grade ABS
Frame Hot dip galvanised
Rolling Travel 30 – 60 cm per side
Load Capacity 70 – 90 kg per sqm
Packing Wooden carton

Where the rolling bench flood table is used

Propagation houses and nursery benches where aisle space is short and every metre of tray has to be reachable.

Installation and System Integration

Level the frame feet first, check the travel clears both aisles, then set the flood and drain to one end of the tray.

Why Choose GNFORTUNE

The load rating is the number to check against your tray weight when wet: a flooded ABS tray plus substrate is heavier than most buyers estimate. You can read more about the background of this method on Hydroponics.

Related Hydroponic Systems

You may also need:

Frequently Asked Questions

How much aisle does a rolling bench save?

One walkway serves two benches. This is because each slides into the other’s space.

What width suits propagation trays?

4ft carries two standard trays side by side; 2ft suits a single row.

Is the tray food grade?

Yes, the ABS tray is food grade, which matters where edible crops are raised.

03 / PRODUCT DETAILS

Group product close-ups into buyer-relevant technical points.

rolling bench flood table installation and layout in use

Rolling Leg Set

The caster leg assembly that carries a bench sideways.

ABS Tray Edge

The moulded tray rim sitting inside the galvanised rail.

Bench Shifted

One bench pushed across to open the aisle.

Flooded Bench

A tray filled with nutrient and trays floating.
04 / COMMERCIAL APPLICATIONS

Let real greenhouse installations prove the application.

rolling bench flood table packing and delivery condition

Plug Nurseries

Propagation houses where every square metre of bench has to earn.

Leafy Propagation

Lettuce raised from seed to transplant on flooded trays.

Research Blocks

Trials where benches are shifted to compare blocks side by side.
05 / SYSTEM OPTIONS

Turn stand and hanging photos into clear configuration choices.

OPTION 01

Two And Three Foot

Narrow benches for small houses and trial bays.
OPTION 02

Four Foot Benches

The common width for tray based propagation.
OPTION 03

Five And Six Foot

Wide benches for high volume seedling lines.
rolling bench flood table application scene in the growing site
rolling bench flood table greenhouse growing scene
06 / PACKING & DELIVERY

Keep logistics practical, visual and concise.

✓ Protected Bundling
Show how channels are stacked and protected before shipment.

✓ Container Loading
Add verified loading quantity and packing data when confirmed.

✓ Project Shipment
Explain project-based packing only when the supplier confirms the service.

07 / TRUST & CERTIFICATION

Product Certifications & Quality Assurance

Review available documentation and certification records to support your technical evaluation and purchasing decisions.

Product Documentation

Review relevant documents for your product and project requirements.

Quality Assurance

Request supporting information for your procurement review.

Document Verification

Contact our team to confirm document scope and applicability.

08 / BUYER FAQ

Questions buyers usually need answered before requesting a quote.

What crops are shown with this NFT gully?

The supplied product page shows strawberry and leafy-green greenhouse applications. Final planting spacing and layout should be confirmed for the specific crop and project.

Can the support system use different installation methods?

The supplied page shows both galvanized support stands and hanging greenhouse layouts. The final support configuration should be matched to the greenhouse structure.

Is this page intended for commercial greenhouse buyers?

The source material includes multi-row greenhouse installations and project photographs, so the redesigned page is structured around commercial and project-based buying decisions.

What information should be prepared for an RFQ?

For a useful project discussion, prepare the crop type, greenhouse dimensions, preferred row layout and any confirmed channel or support requirements.

09 / PROJECT RFQ

Planning an NFT greenhouse project?

Share the crop type, greenhouse size, row layout and target production plan so the sales team can discuss the appropriate gully and support configuration.

Request a Project Quote

Tell us about your requirements. Our team will review your inquiry and contact you about the next steps.