A-type NFT channel in 100x50mm food grade PVC at 1.8mm or 2.0mm wall, 40mm to 60mm or square holes, patented depressed base, bend tested 180 degrees.
Greenhouse NFT
Strawberry & Leafy Greens
Project Configuration
PVC NFT hydroponic gully / channel
Commercial greenhouse hydroponics
Ground-supported and hanging layouts
Farm, distributor and greenhouse project supply
Vertical NFT Channel in A-Type Frame. A vertical NFT channel built into the A-type frame leans the run into a triangle. As a result, gravity does part of the work and the crop faces the light instead of the sky. A depressed base holds a shallow film at the low end of each run.
| Product Name | A-type NFT channel |
| Size | 100 x 50 mm |
| Material | Food grade PVC |
| Thickness | 1.8 mm / 2.0 mm |
| Length | 3 m, 5 m, 5.8 m or custom |
| Holes | 40 / 50 / 60 mm or square |
| Design | Patented depressed base |
| Service Life | Over 10 years |
Leafy vegetable houses where channels lean into an A frame to gain growing face per square metre.
Assemble the A frame first, then clip each channel into the rails at the same angle. Feed enters at the top of the triangle and collects at the depressed base.
The bend test matters on a leaning frame: a channel that cracks at the fold leaks at the lowest point. This is exactly where the crop sits. You can read more about the background of this method on Nutrient film technique.
You may also need:
2.0 mm where spans are long or the frame is loaded; 1.8 mm for short runs.
Yes, 40, 50, 60 millimetre or square holes are set at the spacing you specify.
It keeps a shallow film at the low end so the last plants are not left dry.
✓ Protected Bundling
Show how channels are stacked and protected before shipment.
✓ Container Loading
Add verified loading quantity and packing data when confirmed.
✓ Project Shipment
Explain project-based packing only when the supplier confirms the service.
Review available documentation and certification records to support your technical evaluation and purchasing decisions.
Review relevant documents for your product and project requirements.
Request supporting information for your procurement review.
Contact our team to confirm document scope and applicability.
The supplied product page shows strawberry and leafy-green greenhouse applications. Final planting spacing and layout should be confirmed for the specific crop and project.
The supplied page shows both galvanized support stands and hanging greenhouse layouts. The final support configuration should be matched to the greenhouse structure.
The source material includes multi-row greenhouse installations and project photographs, so the redesigned page is structured around commercial and project-based buying decisions.
For a useful project discussion, prepare the crop type, greenhouse dimensions, preferred row layout and any confirmed channel or support requirements.
Share the crop type, greenhouse size, row layout and target production plan so the sales team can discuss the appropriate gully and support configuration.
Tell us about your requirements. Our team will review your inquiry and contact you about the next steps.
