A frame hydroponic system built from square NFT pipe in white food grade PVC, 100x50mm section, stacked on a steel A frame so each tier drains to the one below before returning to the tank.
Greenhouse NFT
Strawberry & Leafy Greens
Project Configuration
PVC NFT hydroponic gully / channel
Commercial greenhouse hydroponics
Ground-supported and hanging layouts
Farm, distributor and greenhouse project supply
A Frame Hydroponic System Square NFT Pipe. Stacking NFT pipe into an A shape turns unused headroom into growing area. Also. This is because every tier drains into the one beneath it, a single pump still feeds the whole frame. The square section matters here: flat faces grip the frame cradles instead of rolling.
| System Type | A frame hydroponic system |
| Channel Size | 100 x 50 mm square pipe |
| Material | Food grade PVC |
| Color | White |
| Length | 2.9 m or 5.8 m |
| Fittings | End cap with spout |
| Certificate | RoHS |
| Suited To | Lettuce, herbs, leafy brassicas |
Indoor greenhouses, basement and warehouse farms. Also, polytunnel conversions where floor is costly and ceiling height is free.
Assemble the steel A frame first, then drop the pipe into the cradles from the top tier down. Fit the spouted end cap on the lowest row and plumb that back to the reservoir to close the loop.
The frame and the pipe are sold as one package. As a result, there is no mismatch between bracket spacing and channel width. If your house has an unusual span. Also, we cut the pipe to suit rather than selling you a standard kit that nearly fits. You can read more about the background of this method on Nutrient film technique.
You may also need:
Most houses run three to five tiers, set by ceiling height and how much light reaches the lower rows.
No. Solution is pumped to the top row and gravity carries it down through each level to the return.
Yes, the frame is free standing and only needs a level floor and a power point for the pump.
✓ Protected Bundling
Show how channels are stacked and protected before shipment.
✓ Container Loading
Add verified loading quantity and packing data when confirmed.
✓ Project Shipment
Explain project-based packing only when the supplier confirms the service.
Review available documentation and certification records to support your technical evaluation and purchasing decisions.
Review relevant documents for your product and project requirements.
Request supporting information for your procurement review.
Contact our team to confirm document scope and applicability.
The supplied product page shows strawberry and leafy-green greenhouse applications. Final planting spacing and layout should be confirmed for the specific crop and project.
The supplied page shows both galvanized support stands and hanging greenhouse layouts. The final support configuration should be matched to the greenhouse structure.
The source material includes multi-row greenhouse installations and project photographs, so the redesigned page is structured around commercial and project-based buying decisions.
For a useful project discussion, prepare the crop type, greenhouse dimensions, preferred row layout and any confirmed channel or support requirements.
Share the crop type, greenhouse size, row layout and target production plan so the sales team can discuss the appropriate gully and support configuration.
Tell us about your requirements. Our team will review your inquiry and contact you about the next steps.
