Automatic seed planter for nursery trays, pneumatic needle type, 400 trays/h at 97%+ accuracy, seeds 0.7-4.0mm, 220V. Built for greenhouse nursery lines.
Greenhouse NFT
Strawberry & Leafy Greens
Project Configuration
PVC NFT hydroponic gully / channel
Commercial greenhouse hydroponics
Ground-supported and hanging layouts
Farm, distributor and greenhouse project supply
Automatic Seed Planter Needle Seeder. Hand sowing leaves misses and doubles. Also, both cost money by the time plugs are counted. This planter sets a single seed into each cell with pneumatic needles, then hands the tray over ready for germination.
| Structural Type | Pneumatic needle type |
| Use | Seedling machine for plug and nursery trays |
| Productivity | 400 trays per hour |
| Sowing Qualification Rate | At least 97 percent |
| Suitable Seed Diameter | 0.7 to 4.0 mm |
| Working Voltage | 220 V |
| Weight | 150 kg |
| Dimension | 1,500 x 720 x 1,550 mm |
| Applicable Industries | Manufacturing plant, farms |
Commercial nurseries and greenhouse propagation houses raising plug plants in volume, from leafy crops in trays through microgreen and microgreen fodder lines. Accuracy is what pays: fewer misses means fewer empty cells sold on.
Set the tray jig to your cell count, load seed into the hopper, then feed trays from the infeed side. Finished trays pass straight into germination. Also, one person keeps the whole station running.
Machines are tested before dispatch and configured to 220 V as standard. As a result, installation is a plug-in job. Operators get guidance on tray formats and routine needle care. You can read more about the background of this method on Sprouting.
You may also need:
Qualified sowing runs at 97 percent or better. This keeps empty cells low.
Standard nursery and plug trays; set the jig to the cell count you run.
A single operator can supervise several hours of output, removing a bottleneck at peak sowing.
✓ Protected Bundling
Show how channels are stacked and protected before shipment.
✓ Container Loading
Add verified loading quantity and packing data when confirmed.
✓ Project Shipment
Explain project-based packing only when the supplier confirms the service.
Review available documentation and certification records to support your technical evaluation and purchasing decisions.
Review relevant documents for your product and project requirements.
Request supporting information for your procurement review.
Contact our team to confirm document scope and applicability.
The supplied product page shows strawberry and leafy-green greenhouse applications. Final planting spacing and layout should be confirmed for the specific crop and project.
The supplied page shows both galvanized support stands and hanging greenhouse layouts. The final support configuration should be matched to the greenhouse structure.
The source material includes multi-row greenhouse installations and project photographs, so the redesigned page is structured around commercial and project-based buying decisions.
For a useful project discussion, prepare the crop type, greenhouse dimensions, preferred row layout and any confirmed channel or support requirements.
Share the crop type, greenhouse size, row layout and target production plan so the sales team can discuss the appropriate gully and support configuration.
Tell us about your requirements. Our team will review your inquiry and contact you about the next steps.
