Grid Connection for Farms: Transformers and Timelines

A planning guide to grid connection for hydroponic farms: demand estimation, transformer choices, application paperwork, approval timelines and connection costs.
Generator Fuel Systems: Day Tanks, Pumps and Test Runs

The fuel side of farm standby power: day tanks, transfer pumps and filters, diesel ageing in storage, and the test-run discipline that keeps the generator honest.
Controller Program Backups: Setpoints and Restore Drills

A practical guide to controller program backups: what to export and how often, restore drills, backup media choices and version notes that survive staff turnover.
Biocontrol Release Programs: Predators and Compatibility

How biocontrol release programs are organised: pest-to-agent matching, preventive versus corrective releases, spray compatibility rules and programme audits.
Sticky Traps as Instruments: Grid Layout and Trap Counts

A monitoring-focused guide to sticky traps: grid density, height rules, weekly count routines, colour choice and reading the trend rather than the number.
Calibrating Greenhouse Sprayers: Output, Speed, Coverage

A working method for calibrating greenhouse sprayers: jar-test nozzle output, walking speed, litres per hectare arithmetic and water-sensitive paper checks.
Insulating Exposed Lines: Heat Gain and Pipe Sweat Control

A project-engineering guide to insulating exposed lines: heat gain on bare pipes, why pipe sweat drips onto crops, and which insulation material survives a greenhouse.
Farm Air Compressors: Duty Cycle, Dryers and Drip Legs

A plant-room view of farm air compressors: duty cycle, receiver sizing, dryer and dew point choice, and the drip legs that keep water out of blowdown lines.
Level Sensing Without Floats: The Three Main Options

Ultrasonic, hydrostatic and electrode level sensing compared for hydroponic tanks: how each works, how each fails, and how to verify one before trusting it.
Pump Control Panels: Contactors, Overloads and Float Logic

A project-engineering view of pump control panels: what sits inside, how overloads and float logic should be set, and the commissioning tests before handover.